The short answer
Look at the cross-section of the gutter's end and tap it. Half-round is a simple curve, ogee has a double curve like a moulding, square has flat sides. Cast iron rings and is heavy; plastic is light and sounds dull when tapped.
Profile
- Half-round. A plain semicircular channel. Very common on both Victorian and modern homes.
- Ogee. A double curve on the front face, like a decorative moulding. Very common on Victorian and Edwardian cast iron, also made in plastic.
- Square or box. Flat bottom and straight sides. Common on 1960s onwards and in modern plastic systems.
- Deep-flow and large-capacity. Deeper channels for larger roofs.
Material
- Cast iron. Heavy, rigid, rusts, bolted joints. A knuckle tap gives a dull ring.
- Plastic (uPVC). Light, may be white, black, brown or grey, clip-together joints with rubber seals. Sounds hollow.
- Aluminium or steel. Less common, lighter than cast iron, does not rust the same way.
Why it matters
The profile and material decide how a repair is done and which parts fit. Parts of different makes and profiles do not interchange, so a photo of your gutter end and the downpipe fixing saves a wasted order. Send photos on WhatsApp for a free quote.
Stop and call a professional if: you need to climb to see the profile. A photo from the ground with a zoom lens is usually enough for a quote.