The short answer
A gutter overflows because water is arriving faster than it can leave. The usual causes are a blockage in the gutter, a blocked downpipe, a sagging run that holds water, or a roof that sheds more water than one outlet can handle.
Work out where it overflows
Watch from a safe spot during rain. Overflow at one point along the run points to a blockage or a dip at that spot. Overflow at the end where the downpipe is points to a blocked downpipe. Overflow along the whole length in the heaviest rain points to too small a gutter or outlet for the roof.
The causes
- Blocked gutter. Leaves, moss and roof grit build into a mat that dams the flow.
- Blocked downpipe. The gutter above is fine but cannot empty. Check the foot of the pipe for flow.
- Sagging run. A gutter should fall gently towards its outlet. If brackets have dropped, water sits in the low point and spills over.
- Slipped joints or a misaligned section. Water spills at the join instead of passing through.
- Too much roof for the outlet. A large roof draining to a single downpipe can overwhelm it in a downpour. This is a design issue, not a cleaning issue.
What fixes it
For blockages and blocked downpipes, a clean. For a sagging run, refixing brackets. For a design problem, an extra downpipe or larger gutter, which is a job to specify before you buy anything.
Stop and call a professional if: water is coming into the house, or the gutter is pulling away from the wall. Do not climb up to look.